Automatic Nonwoven Towel Folding Machine — 120 Pcs / Min (OEM/ODM)
Automatic nonwoven towel folding machine for towels, wet wipes, table cloths and kitchen wipes — up to 120 pcs per minute. Optional single colour printing or logo device. The machine folds and counts in one pass, so the pack that comes off the line is the pack you specified.
In a towel or wipe line, folding is where a good web can still be turned into an unsaleable pack. A fold that is out of square, a count that drifts, or a stack that will not sit flat all show up as complaints at the other end. This machine addresses the mechanical part of that problem: a repeatable fold, a pneumatic counter that does not depend on an operator keeping pace, and a frequency-conversion drive that holds speed under load.
Riway runs nonwoven converting equipment in Ningbo, China and has manufactured wipes, pads and towels for buyers in 75+ countries since 2009. We supply this machine on the same basis we run it — configured around the product, not sold from a list.
What the Machine Does
- Folding — folds the nonwoven web to the finished item size
- Counting — an automatic pneumatic counting device registers pieces per pack
- Stacking and delivery — folded pieces leave the machine in counted stacks
- Printing (optional) — a single colour printing or logo device applies a mark in line
Because counting is pneumatic and automatic, the count per stack does not depend on an operator watching the web. On a manual line it does, and a miscount is invisible until the pack is opened.
Key Features
- Production speed up to 120 pcs / minute
- Automatic pneumatic counting device
- Frequency conversion motor — low power consumption
- Optional single color printing or logo device
- Fold size set to your finished item
Specifications
| Item | Automatic nonwoven towel folding machine |
|---|---|
| Speed | Up to 120 pcs / minute |
| Application | Towels, wet wipes, table cloths, kitchen wipes |
| Features | Auto counting, frequency motor, optional printing |
| Samples | Per request |
| MOQ | On request |
Where It Fits in a Production Line
A nonwoven towel folding machine sits between the unwind and the packing stage. Material is fed in from a mother roll, folded and counted, and the counted stack passes to packing or bagging. Buyers normally specify it together with the unwind arrangement and the packing format, because the fold size and the pack size have to agree: a machine set for one finished size will not drop neatly into a pack designed for another.
A nonwoven towel folding machine covers a wider range than the name suggests. Towels, wet wipes, table cloths and kitchen wipes all use the same folding principle and differ mainly in substrate, fold size and count, which is why one unit can serve more than one SKU in a plant.
How to Specify the Machine
Four points settle most of a specification. The finished item size, because it fixes the fold geometry. The substrate — spunlace, airlaid, wetlaid or a laminate — because web behaviour sets tension and fold behaviour. The count per pack, because it determines how the stacks are delivered downstream. And the target output, because running a machine at the top of its speed range for a whole shift is a different proposition from running it comfortably in the middle.
Answer those four and the nonwoven towel folding machine can be quoted against a real requirement rather than a general description.
Printing and Branding Option
An optional single colour printing or logo device applies a mark to the folded item in line. For a private-label programme this is often what turns a plain towel into a branded one, and specifying it at the machine stage avoids a separate printing pass later.
Utilities, Space and Installation
Buyers normally confirm the available power supply, compressed-air supply and floor space before the specification is frozen, since the pneumatic counting device and the drive have their own requirements. Layout matters for the same reason: mother-roll storage on one side and packing on the other determine how material and finished goods move through the plant, and it is cheaper to plan that on paper than to move a machine that is already installed.
Commissioning, Training and Spare Parts
Scope of supply, installation, commissioning and operator training are agreed per project and stated in the quotation, so there is no ambiguity about who is responsible for what on site. Wear parts on a folding machine are concentrated in the folding and cutting sections; a spare-part list is provided with the quotation so stock can be planned before commissioning rather than after a stoppage.
Quality Control and Acceptance
Acceptance is measured on the product, not the machine: fold size, squareness, count per stack and stack stability are the parameters that matter, and they are written into the specification so acceptance testing has a defined pass condition from the start.
Our own production runs to ISO 9001, ISO 14001, ISO 45001 and ISO 13485, with GMP (COSMETIC) and FSC certification — see the certificates and reports page. Background on nonwoven materials and converting is published by EDANA.
Certification
ISO 9001 / 14001 / 45001, GMP (COSMETIC), FSC. A batch certificate of analysis ships with every order.
Frequently Asked Questions
What can this machine fold? This nonwoven towel folding machine handles nonwoven towels, wet wipes, table cloths and kitchen wipes. The relevant variables are substrate, fold size and count per pack rather than the product name.
Can it print our logo? Yes, with the optional single colour printing or logo device fitted.
How is the count controlled? By an automatic pneumatic counting device, so the count per stack does not depend on an operator keeping pace with the machine.
Is the fold size adjustable? Fold size is set to your finished item during specification. Tell us the finished dimensions and the substrate and we will confirm the configuration.
How do we start? Send the finished item size, substrate, count per pack and target output, and we will come back with a specification and a quotation.







